Re-Entrant Horn Speakers


DK 115 S - 8 Ohm



dk115s_8_1

Short-stroke re-entrant horn speakers for mid- to high-range. Water-resistant 8-ohm model made of black high-impact ABS plastic, high IP protection class. High sound pressure and good voice reproduction. specially suitable for concealed installation due to compact design. Pivoting metal base for attaching to ceilings, walls, columns etc. Additional mounting alternatives due to two integrated M4 tapped holes in rear metal base.

DK 121 - 100 V



dk121_100

Built-in horn speaker with 100 V transformer. Waterproof design. Housing made of black lacquered aluminium, horns made of polypropylene (PP). High IP protection class (IP 67), high sound pressure and good voice reproduction. Ideal for inconspicuous installation due to the very compact dimensions. The potential equalisation connection is by means of an M6 grubscrew on the rear of the housing. The connection is via a four-core flexible cable (0.5 m).

Connection:
black – white: 6,0 W
white – yellow: 3,0 W
yellow – blue: 1,5 W
black – yellow: 1,0 W
white – blue: 0,5 W
black – blue: 0,3 W

DK 121 - 8 Ohm



dk121_8

Built-in horn speaker - low profile. Waterproof design with an impedance of 8 ohms. Housing made of black lacquered aluminium, horns made of polypropylene (PP). High IP protection class, high sound pressure and good voice reproduction. Ideal for inconspicuous installation due to the very compact dimensions, e.g. in vehicles. The potential equalisation connection is by means of an M6 grubscrew (including two screws, lock washer and shake-proof washer) on the rear of the housing. The connection is via a two-core flexible cable (250 cm) with insulated flat pin terminals (4.8/0.8 and 2.8/0.8 mm).

DK 121 FE EB - 8 Ohm



dk121fe-eb_8_1

Built-in horn speaker - low profile. Waterproof design with an impedance of 8 ohms and ferrite magnet. Housing made of black lacquered aluminium, horns made of polypropylene (PP). High IP protection class, high sound pressure and good voice reproduction. Ideal for inconspicuous installation due to the very compact dimensions, e.g. in vehicles. The connection is via a two-core flexible cable (100 cm); certified in accordance to ISO 6722 class B. Cable: FLRYCY 2 x 0.75 mm².

Differences to DK 121 - 8 Ohm:
- Ferrite magnet
- Special cable
- No potential equalisation

DK 133 - 100 V



dk133

Horn Speaker with waterproofed design and 100 V transformer. High IP protection class, high sound pressure level, good voice reproduction, compact dimensions.

DK 133 - 8 Ohm



dk133

Horn Speaker with waterproofed design and 8 ohm impedance. High IP protection class, high sound pressure level, good voice reproduction, compact dimensions.

DK 97 - 8 Ohm



dk97_8_1

Horn Speaker with waterproofed design and 8 ohm impedance. High IP protection class, high sound pressure level, good voice reproduction, compact dimensions.