Visaton - Lautsprecher und Zubehör, Loudspeakers and Accessories

AD 25 H
Art. No. 6057

Adapter for driver-horn systems. Expecially suited for the driver DR 45 N 8 OHM with the horn systems TL 300 MH or M 300.

AK 10.13
Art. No. 1020

Cover cap for midrange drivers which require an enclosed air volume of their own. Suits any midrange driver with a diameter of up to 10 cm. Half-round shape avoids resonances.

AMP 2.2
Art. No. 7100

Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms.
Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.

Typical applications:
- Info terminals
- Computer displays
- Showcases

Technical Data:
Power supply	12 V DC
Quiescent current	46 mA
Input impedance	10 kOhm
Max. current consumption	1.1 A
Power output (sine, 1% / 5% / 10% THD)	2 x 2.1 / 3.1 / 3.3 W (4 Ohm) 2 x 1.6 / 1.9 / 2.1 W (8 Ohm)
Input voltage (full conduction)	60 mV
Output impedance	1.1 Ohm
SNR	61 dB (A) / 59 dB (ext)
Frequency response (−3 dB)	40 Hz–40 kHz
Terminal In-/Output	jack 3.5 mm stereo
Terminal DC	5.4 mm outer diam. (−) 2.1 mm inner diam. (+)
Net weight	0,178 kg
Temperature range	−10 ... 50 °C

AMP 2.2 LN
Art. No. 7102

Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms.
Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (not supplied) or the computer's on-board power supply. Short-circuit proof.

High signal-to-noise ratio.

Typical applications:
- Info terminals
- Computer displays
- Showcases

Technical Data:
Power supply	12 V DC
Quiescent current	46 mA
Input impedance	10 kOhm
Max. current consumption	1.1 A
Power output (sine, 1% / 5% / 10% THD)	2 x 1.5 / 2.5 / 3.2 W (4 Ohm) 2 x 1.7 / 1.9 / 2.1 W (8 Ohm)
Input voltage (full conduction)	700 mV
Output impedance	1.1 Ohm
SNR	81 dB (A) / 78 dB (ext)
Frequency response (−3 dB)	40 Hz–40 kHz
Terminal In-/Output	jack 3.5 mm stereo
Terminal DC	5.4 mm outer diam. (−) 2.1 mm inner diam. (+)
Net weight	0,178 kg
Temperature range	−10 ... 50 °C

ARF 13
Art. No. 4775

Adapter ring for fitting 13 cm speakers into the door of Fiat Ducato (as from 2006).

Material: ABS

BR 13.25
Art. No. 5208

Bass reflex tube, adjustable between 130 and 250 mm, black plastic.

BR 15.34
Art. No. 5214

Bass reflex tube which can be mounted without screws.

BR 19.24
Art. No. 5215

Bass reflex tube which can be mounted without screws.

BR 25.50
Art. No. 5216

Bent bass-reflex vent with two flow-resistant optimized trumpet-shaped vent outlets to prevent air-flow noises and friction losses.

BR 6.8
Art. No. 5212

Bass reflex tube which can be mounted without screws.

BT 95/75
Art. No. 5182

Double loudspeaker terminal with gold-plated binding posts and bridges. For bi-wiring or bi-amping. Including four mounting flanges for a PCB.

DAMPING MATERIAL
Art. No. 5070

Damping material made of polyester wool with excellent damping properties. Can be handled and fitted easily.
Packing unit: 125 g (2 mats, enough for a volume of up to 20 l).

FD 18
Art. No. 50103

Protection cover made of steel sheet for DL 18/1 and DL 18/2 with two push-out holes for cables.
Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.

FD 18 L
Art. No. 50123

Protection cover made of steel sheet for DL 18/1 and DL 18/2 with two push-out holes for cables. Four mounted screws to attach terminals and cable clamps. The enlarged volume betters the sound of the inserted speaker.

Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.

FDA
Art. No. 50127

Adaptor with fail safe mechanism. The FDA is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The FDA is equipped with a ceramic terminal, a thermal fuse and a heat-resistant high-temperature wiring (10 cm) so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems.

FOAM NG 42
Art. No. 5062

Damping board made of grey foam for damping of speakers. Can be fixed with glue for polyfoam, e. g. "Assil K" by Henkel.

FRAME DOWELS
Art. No. 5095

Frame dowels for mounting the cover frame to the speaker baffle. The holes (diameter: 10 mm) are drilled in one operation, through the cover frame into the speaker baffle. 1 set consists of male and female connectors.

Gasket for FR 10 WP
Art. No. 2112

Packing unit: 25 pieces

Gasket for FR 13 WP
Art. No. 2115

Packing unit: 25 pieces

Gasket for FR 16 WP
Art. No. 2118

Packing unit: 25 pieces

GRILLE 10 ES
Art. No. 4642

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Suitable for: FR 10 4 OHM; FR 10 8 OHM; FR 10 H 4 OHM; FR 10 H 8 OHM; FR 10 HM 4 OHM; FR 10 HM 8 OHM; R 10 S 4 OHM; R 10 S 8 OHM; R 10 SC 4 OHM; R 10 SC 8 OHM; FX 10 4 OHM

GRILLE 10 R/134
Art. No. 4670

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Suitable for: FR 10 4 OHM; FR 10 8 OHM; R 10 S 4 OHM; R 10 S 8 OHM; R 10 SC 4 OHM; R 10 SC 8 OHM; FX 10 4 OHM

GRILLE 10 RS
Art. No. 4640

GRILLE 13 R/162
Art. No. 4667

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Grille can be supplied painted in other RAL colours on request.

GRILLE 13 RS
Art. No. 4643

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Grille can be supplied painted in other RAL colours on request.

GRILLE 4X6"
Art. No. 4645

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Suitable for: DX 4X6 P 4 OHM; FR 9.15 4 OHM

GRILLE CENTER 80
Art. No. 8200

Protective grille made of punched steel sheet, black. Material thickness: 0.5 m.

GRILLE EFFECT 130
Art. No. 8230

Protective grille made of punched steel sheet, black. Material thickness: 0.5 m.

GRILLE EFFECT 80
Art. No. 8210

Protective grille made of punched steel sheet, black. Material thickness: 0.5 m.

GRILLE FR 12 BM
Art. No. 2072

Protective grille made of silver painted metal. Decoration ring made of silver painted plastics.
Suitable for: FR 12 4 OHM; FR 12 8 OHM

GRILLE FR 87
Art. No. 4639

Protective grille made of black plastics.
Suitable for: FR 87 4 OHM ; SL 87 WP 4 OHM ; SL 87 WP 8 OHM

HIGH-END-TERMINAL
Art. No. 5195

High-End-Terminal with rigid mounting plate, 5-Layer Supra Gold Plated WBT binding posts and freely revolving pressing part. For connection cables with cross sections between 1.5 and 10 square millimetres to guarantee a proper contact for peak currents up to 200 A.

KM 140
Art. No. 1329

Ring-shaped magnets for the compensation of the stray magnetic field (magnetic shielding). The ring has to be glued on the rear pole-plate (e. g. with Pattex), reducing the stray magnetic field to a minimun, allowing speakers positionings of 20 cm apart from TV or computer screens.

Suitable for: AL 200 8 OHM; AL 200 DV 2x8 OHM; GF 200 2 X 4 OHM; GF 250 2 X 4 OHM; TIW 360 8 OHM; TIW 360 DS 2 X 4 OHM; TIW 360 X 8 OHM; TIW 400 8 OHM; TIW 400 DS 2 X 4 OHM; W 250 S 4 OHM; W 250 S 8 OHM; W 300 S 4 OHM; W 300 S 8 OHM; WSP 21 S 8 OHM; WSP 26 S 8 OHM

LAMB'S WOOL
Art. No. 5069

Lamb's wool with optimum damping properties, for high-end speaker boxes. Packing unit: 125 g (enough for a volume of up to 20 l).

LC 57
Art. No. 5186

Loudspeaker level control (L-pad) for treble and midrange, high power handling (up to 20 watts continuous power), with ventilation slots on the rear, left stop position equals "Off". Serves for adapting the mid- and highrange to the acoustic properties of the room.

Including mounting screws.

LC 95
Art. No. 5185

Loudspeaker level control (L-pad) for professional applications in high-power systems. 100 W continuous power. With black metal cover for better heat dissipation, efficiency reduction scaled in dB (refering to a load impedance of 8 ohms). Easy installation. Mounting cutout: 74 mm ø

LK 2 NG
Art. No. 5189

Loudspeaker terminal with solid terminal board and foam sealing for air-tight installation. For cable diameters of up to 10 mm2, 2-pole, 1 red and 1 black lever each, incl. mounting screws.

LTS 50
Art. No. 5209

Coating liquid for loudspeaker cones (black). For better internal damping, reduction of partial oscillation and linearization of the frequency response. Prevents bleaching of the cone. Especially suited for cone speakers with paper cones. Water-soluble until hardened completely. Contents: 50 ml.

PROTECTIVE GRILLE FR 12
Art. No. 2062

Protective grille made of mat-black metal. Decoration ring made of black ABS plastics.
Suitable for: FR 12 4 OHM; FR 12 8 OHM

PROTECTIVE GRILLE FR 8
Art. No. 1138

Protective grille made of mat-black metal. Decoration ring made of black plastics.
Suitable for: FR 8 4 OHM; FR 8 8 OHM; FRS 8 4 OHM; FRS 8 8 OHM; F 8 SC 4 OHM; F 8 SC 8 OHM

Properties:
- Plastic: PC (UL 94: V-2)

PT 57 NG
Art. No. 5192

Loudspeaker terminal with recessed terminal board and foam sealing for airtight installation. For cable diameters of up to 10 mm², 2-pole, 1 red and 1 black lever each. Round mounting cutout.
Including mounting screws.

Rear panel WL 13 P
Art. No. 50322

Rear panel made of plastics for WL 13 P 100 V , WL 13 PR 100 V and WL 13 PR P 100 V. Due to the rear panel the use of the speaker at round-shaped columns or raftered ceilings is possible. Four mounting-screws are included.

SET OF CONES FONTANA
Art. No. 5091

Two-part set of cones for the omnidirectional FONTANA and FONTANELLA SAT proposals, consisting of a large cone for the woofer and one small one for the tweeter. Material: beech.

SG 25
Art. No. 1131

Protective grilles for dome speakers. Attached by speaker magnet.

SPEAKER STANDS
Art. No. 5092

Speaker stands, beech waxed. Packing unit: 1 pair.
1. As damping device, to avoid the transmission of enclosure resonances to the floor. 4 stands will be required for each speaker.
2. As supporting stands for VISATON horn M 300 / TL 300 MH of the VISATON speaker MONITOR 890 MK II. 3 stands for each horn or box will be required.

SPIKES
Art. No. 5170

Gold-coloured spikes effectively separate the speaker cabinets acoustically from the ground. Firmly fitted to the cabinet using screw-in nuts. The threaded design makes these spikes height adjustable, even after fitting. Protect the floor from damage by the spikes by placing metal disks under the spikes. If required, soft foam rubber disks are available as a set.
One set contains 4 spikes.
Maximum weight capacity: 75 kg per set

ST 77
Art. No. 5183

Round terminal with gold plated binding post and two mounting flanges for a PCB.

TR 10.16
Art. No. 1803

Universal 100 V transformer for sound reinforcement systems.

Typical applications:
- Allows all 4 ohm, 8 ohm and 16 ohm speakers to be used in 100 volt networks

TR 6.8
Art. No. 1806

100 V transformer for full-range speakers in 100 V networks.

Typical applications:
- Allows all 4 and 8 ohm speakers to be used in 100 volt networks

TR 84
Art. No. 1801

100 V transformer for full-range speakers in 100 V networks.

Typical applications:
- Allows all 4 and 8 ohm speakers to be used in 100 volt networks

Universal-joint brackets
Art. No. 50403

Universal-joint brackets for speaker columns EZ 40.7 100 V; EZ 60.7 100 V; EZ 55.10 100 V and EZ 97.10 100 V .

UP 35 / 2
Art. No. 5719

Universal circuit board for 2-way crossovers, impedance compensation and level reduction possible.
Material: Epoxy glass

UP 35 / 3
Art. No. 5720

Universal circuit board for 2-way and 3-way crossovers, impedance compensation and level reduction possible.
Material: Epoxy glass

UP 70 / 3
Art. No. 5718

Universal circuit board for 2-way to 4-way crossovers, with even thicker copper layer; impedance compensation and level reduction possible.
Material: Epoxy glass

Material for speaker covers

Stretch material (black) with excellent sound permeability, cut goods.

Wood screws

Self-tapping wood screws.Black browned Philips screws, half-round head. Packing unit: 24 pieces

Logos

Logos for speaker boxes (black plastic, gold type) obtainable in two different dimensions.

Countersunk screws

Black browned countersunk screws.Packing unit: 24 pieces.

Spare diaphragms

Special wood screws

Special wood screws.Black browned hexagonal sockethead screws. Packing unit : 24 pieces

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|