Crossover Components


Electrolytic capacitors


elko_rau

Bipolar electrolytic capacitors with rough foil and extremely good price performance ratio for the construction of crossovers. 63 Vdc, 10 % tolerance.

FC coils


fc4_7

Ferrite coils with tinned wire ends.

Ceramic resistors 10 W


Keramikwiderstände 10 Watt

Ceramic resistors for efficiency adaption of speakers to passive crossovers. High power handling, extremely temperature-resistant, low inductivity, small tolerances.

Dimensions: 48 x 10 x 10 mm

KN coils


kn_spulen

Coils with a ferrite core.Very economical. For applications in which higher internal resistance is acceptable (e.g. correcting networks).

LR ferrit coils


lr4_7

Ferrite coil with tinned wire ends. Very high power handling, low loss due to the low internal resistance.

MKP capacitors


MKP

Foil capacitors for High-End speakers. 250 volts DC strength. Extremely low losses due to polypropylene dielectric.

MKT-A capacitors


mkt_a

Foil Capacitors for professional crossovers, low loss and high power handling. Axial design. DC strength 250 V (100 V for models 82 µF and 100 µF).

MKT capacitors


MKT

Foil Capacitors for professional crossovers, low loss and high power handling, 250 volts DC strength.

MOX-resistors 10 W


MOX-Widerstände 10 Watt

MOX-resistors (metal oxide layered resistors) for efficiency adaption of high-end speakers to passive crossovers. High power handling, extremely temperature-resistant, low inductivity, small tolerances.

Dimensions: 52 x Ø 8 mm

SP coils


sp1_0_1_0

Air-Core coil with tinned wire ends. High power handling, solid winding form.