Archive
AK 14.20
Cover cap for midrange drivers which require an enclosed air volume of their own. For 10 cm, 13 cm and 17 cm midrange drivers. Half-round shape avoids resonances.
No longer available.
AL 130 A 8 OHM
13 cm (5") High-End low midrange driver similar to AL 130 8 OHM, but with black cone and modified basket.
No longer available.
AL 170 A 8 OHM
17 cm (6.5") High-End low midrange driver similar to AL 170 8 OHM, but with black cone.
No longer available.
AL 200 DV 2x8 OHM
20 cm (8") High-End woofer with double voice-coil, stiff aluminium cone, solid aluminium die-cast basket and elastic rubber surround. Extremely low mechanical and electrical losses due to vented pole plate, vented damper and capton voice coil carrier. Fast pulse response due to light weight aluminium cone. Suitable for subwoofers, which should be connected in stereo mode.
No longer available.
BG 13 8 OHM
13 cm (5") full-range driver with tweeter cone. Very evenly spread frequency response and excellent voice reproduction quality. High efficiency. For use in larger scale PA arrays or smaller monitor speakers.
Typical applications:
- PA arrays, projection speakers
- Smaller monitor speakers
No longer available.
BG 30 NG 8 OHM
30 cm (12") woofer with hard cone suspension for keyboard speakers, subwoofers and stage monitors. High efficiency and suitable for sealed and vented systems. High power handling due to magnet vent, capton voice coil carrier and stiff fabric surround.
No longer available.
Building Suggestions for Loudspeakers 2008
Content:
ALTO I
ALTO II
ALTO III C
ALTO GENESIS SAT
ALTO GENESIS SUB
ALTO LINE
ARIA
ARIA LIGHT
ARIA 2
ARIA 2 LIGHT
ARIA 2 MHT CENTER
ARIA MHT
ATLANTIS
ATLAS COMPACT MK V
BIJOU
CLASSIC 200
CLASSIC 200 GF
CLOU
CONCORDE MK III
CONGA
COUPLET
COUPLET LIGHT
EXPERIENCE V 20
FIESTA 25
FONTANA
FONTANELLA SAT
FONTANELLA SUB
MINI SUB 170
MB 115/B
MB 156/3
MB 208/H
MONITOR 890 MK III
NANO SAT MK II
NANO SUB
NoBox BB
PORTRAIT
QUADRO
SOLITUDE
SOLO 20
SOLO 50
SOLO 100
STARLET
TOPAS
VIB 130 TL
VIB 170 AL
VIB 2000 GF
VOX 80
VOX 200
VOX 200 LIGHT
VOX 253
VOX 253 MTI
VOX 301
No longer available.
BZ 130 4 OHM
13 cm (5") low-midrange system with a very strong magnetic drive and mounted in a Euro standard basket. The connection terminals are gold plated 4.8 mm and 6.3 mm soldering lugs. Coloration free midrange and high efficiency. Car specific installation is possible, provided that the mounting depth of the large magnet has been considered.
No longer available.
BZ 300 4 OHM
30 cm (12") subwoofer featuring a coated cone and a solidly constructed metal basket. To provide long cone strokes and high power handling, the driver is equipped with an extended rear pole-plate. Due to the 50 mm voice coil the BZ 300 is suited for high power operation. Suitable for free-air-operation as well as driver for band-pass and vented enclosures.
No longer available.
CF 25 4 OHM
25 mm fabric dome tweeter ferrofluid cooled voice-coil, featuring well-balanced frequency response and high efficiency. Exact reproduction of the high range band, transparent, coloration-free, soft and well-balanced.
Installation: Very flexible due to the swivel mounting ring for car doors and dash boards. Mounting accessories are included.
No longer available.
CT 25 4 OHM
25 mm metal dome tweeter with Ferro-fluid-cooled voice-coil, featuring a linear frequency response and a good pulse response. Exact reproduction of the complete high range band, transparent and detailed performance even at highest levels and good omnidirectional sound distribution.
Installation: Very flexible due to the swivel mounting ring for car doors and dash boards. Mounting accessories are included.
No longer available.
DAL 13 100 V
Wall/ceiling surface-mounted speakers in semi-spherical plastic housings with perforated sheet covers. Equipped with one high-quality 13 cm full-range loudspeaker. Good music sound and clear voice reproduction. The rear baffle of the loudspeaker is attached to the wall or ceiling using four screws. The transformer can be connected to the 100 volt supply using screw terminals. Next, the housing, clearly marked to prevent incorrect connection, is attached and locked in place via the bayonet mount.
- Plastics: ABS (UL 94: HB)
Typical applications:
- Design-Wall-mounted/ceiling-mounted speakers in 100V sound reinforcement systems in public areas, schools, hotels etc.
Attributes:
- Moisturised cone
- 100 V transformer
- Includes fixing materials.
No longer available.
DHT 9 8 OHM
HiFi horn driver for the high-frequency range above 5000 Hz. Very good pulse response and linear frequency response due to special aluminium diaphragm. High power handling and linear impedance due to capton voice-coil carrier and aluminium voice-coil wire.
No longer available.
DK 115 S 8 OHM
Short-stroke re-entrant horn speakers for mid- to high-range. Water-resistant 8-ohm model made of black high-impact ABS plastic, high IP protection class. High sound pressure and good voice reproduction. specially suitable for concealed installation due to compact design. Pivoting metal base for attaching to ceilings, walls, columns etc. Additional mounting alternatives due to two integrated M4 tapped holes in rear metal base.
Typical applications:
- Public address in factories, railway stations etc.
- Outdoor address systems
- Use in alarm/alert systems
Attributes:
- Weather-proof plastic cabinet
- UV-resistant
- functionally at low temperature according to EN 60068-2-1 (-40°C; 96h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
- Plastic: ABS (UL 94: HB)
No longer available.
DL 10 20 OHM
10 cm (4") ceiling-mounted speaker with white metal cover (RAL 9010). Suitable for use in all types of hollow ceilings. Easy fitting in round cut-out using spring arms. A push-terminal block allows quick and easy connection. A compact solution for home and professional use with good sound qualities.
DL 10 can be supplied painted in other RAL colours on request.
Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 10, Art. nos. 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1293-16.
Typical applications:
- For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc.
Attributes:
- Moisturised cone
- UV-resistant
- Metal basket, non-corrodible
- functionally at low temperature according to EN 60068-2-1 (-40°C; 96h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
- Ball-resistant
No longer available.
DL 13/2 8 OHM
Typical applications:
For suspended ceilings in shops, private accomodation, bathrooms etc.
No longer available.
DL 17 100 V
17 cm (6.5") ceiling speaker with corrosion free, mat-white metal grille (RAL 9010), suitable for installation in suspended ceilings. Developed for professional 100 V sound reinforcement systems (transformer version) and domestic applications (8 ohm version). Good music reproduction and clear speech reproduction properties. Solderless level adjustment. Easy installation without screw-mounting. Including self adhesive mounting template.
No longer available.
DL 17 8 OHM
17 cm (6.5") ceiling speaker with corrosion free, mat-white metal grille (RAL 9010), suitable for installation in suspended ceilings. Developed for professional 100 V sound reinforcement systems (transformer version) and domestic applications (8 ohm version). Good music reproduction and clear speech reproduction properties. Solderless level adjustment. Easy installation without screw-mounting. Including self adhesive mounting template.
No longer available.
DL 18 100 V
17 cm (6.5") ceiling speaker with corrosion free, mat white grille (RAL9010), suitable for the installation in suspended ceilings of any material. Quick snap-in mounting due to round ceiling cut-out through which the speaker with transformer and mounting ring can be installed. A push- terminal block allows a quick and easy connection to the 100-V-network including the eventually necessary level adjustment. A quick-mounting bayonet connection provides an easy installation of the grille.
DL 18 can be supplied painted in other RAL colours on request.
Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 18, Art. nos. 1293-15 and 1292-00 in conjunction with the front ring Art. no. 1293-20.
Typical applications:
- Ceiling-mounted speakers in 100 V sound reinforcement systems in public areas, schools, hotels etc.
No longer available.
DL 18/1 B 100 V
17 cm (6.5") ceiling speaker with aesthetically appealing grille, suitable for the installation in suspended ceilings of any material. Easy mounting due to solid spring arms into round ceiling cut-out through which the one-piece speaker can be installed safe against ball throwing. A push terminal block allows quick and easy connection to the 100-V-network.
No longer available.
DL 18/1 F 100 V
17 cm (6.5") ceiling speaker with a corrosion-resistant grille (RAL 9010), suitable for installation in suspended ceilings of any kind. Quick snap-in mounting due to round ceiling cut-out through which the speaker, transformer and mounting ring can be installed. The attractive grille is quickly and conveniently fixed with a bayonet locking mechanism.
Any volume adjustments necessary are carried out by a simple spring clip mechanism.
The DL 18/1 F is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The loudspeaker is equipped with ceramic terminals, a thermal fuse and a heat-resistant high-temperature wiring so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems.
Ceramic terminals for rapid connection to the 100 V mains. A second terminal enables the wiring to be looped through to the next speaker. The cable clamps supplied ensure the incoming cables of 8, 12 or 16 mm diameter are firmly held. These loudspeakers are also fitted with a series capacitor for monitoring the circuit.
Typical applications:
- Ceiling-mounted speakers in 100 V sound reinforcement systems in public areas, schools, hotels etc.
No longer available.
DL 18/2 8 OHM
17 cm (6.5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A quick-mounting bayonet connection provides an easy installation of the grille.
DL 18/2 can be supplied painted in other RAL colours on request.
Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 18/1 and DL 18/2, Art. nos. 1293-15, 1293-00, 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1293-20. Fire protection housing systems (F30) are available (FlamoX).
Typical applications:
- For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc.
Attributes:
- Moisturised cone
- UV-resistant
- Metal basket, non-corrodible
- functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
No longer available.
DL 8 20 OHM
8 cm (3.3") ceiling-mounted speaker with white metal cover (RAL 9010). Suitable for use in all types of hollow ceilings. Easy fitting in round cut-out using spring arms, electrical connection by spring-loaded terminal clips. A compact solution for home and professional use with good sound qualities.
DL 8 can be supplied painted in other RAL colours on request.
Speaker cabinet systems for ceilings are available for these speakers from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet is suitable for the DL 8, Art. nos. 1292-35, 1292-00, 1294-15 and 1294-00 in conjunction with the front ring Art. no. 1292-01.
Typical applications:
- For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc.
Attributes:
- Moisturised cone
- UV-resistant
- Metal basket, non-corrodible
- functionally at low temperature according to EN 60068-2-1 (-40°C; 96h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
- Ball-resistant
No longer available.
DMR 120 4 OHM
50 mm (2") HiFi fabric dome driver with square shaped front plate for the midrange band between 800 - 7000 Hz. Due to the optimised dome shape with double coating in conjunction with the highly damped surround, linear frequency response and no partial oscillations. Due to the powerful magnetic driver and the ferrofluid-cooled voice-coil high efficiency and high power handling can be guaranteed.
No longer available.
DMR 35 8 OHM
35 mm (2") HiFi fabric dome driver with square front plate for the midrange between 1200 and 10000 Hz. Linear frequency response due to the optimised double coated dome and in conjunction with a highly damped surround. High power handling due to ferrofluid cooled voice-coil.
No longer available.
DSM 25 R - 8 Ohm
25 mm (1") High-End titanium dome driver for the highrange above 2000 Hz. Due to the enormously strong and ultra-light titanium dome and in conjunction with a highly damped sypronyle surround, linear frequency response and no partial oscillations. Due to the enormously high magnetic flux in the ferrofluid-filled air-gap high efficiency and high power handling are possible.
No longer available.
DT 90 8 OHM
20 mm (0.8") polycarbonate HiFi driver with square shaped front plate for the highrange above 3000 Hz. Balanced frequency response and good omnidirectional sound distribution. High power handling due to ferrofluid-cooled voice-coil.
No longer available.
DTW 110 NG 8 OHM
25 mm (1") HiFi fabric dome driver for the highrange above 2000 Hz. Due to the optimised dome and the highly damped surround, a linear frequency response without partial oscillations is guaranteed. With a high magnetic flux in the ferrofluid-filled air-gap a high efficiency and a high power handling can be realised. Especially suitable for 3-way combinations in conjunction with the fabric dome tweeter G 50 FFL.
No longer available.
DTW 72 4 OHM
14 mm (0.6") polycarbonate dome driver for the highrange above 4000 Hz. Balanced frequency response and excellent omnidirectional sound distribution. Due to the strong magnetic drive and the ultra-light dome in conjunction with the ferrofluid-cooled voice-coil good efficiency and high power handling.
No longer available.
DTW 8.12 NG 8 OHM
25 mm (1") HiFi fabric dome driver with rectangular shaped front plate for the highrange above 2000 Hz. Coated dome with linear frequency response and strong magnetic drive for high efficiency. High power handling due to ferrofluid-filled air-gap. Suitable for 2- and 3-way combinations. Due to the front plate shaping especially suitable as replacement unit for many Hifi speakers.
No longer available.
DTW 95 NG 8 OHM
25 mm (1") HiFi fabric dome driver with square shaped front plate for the highrange above 2000 Hz. Due to the optimised dome and the highly damped surround, a linear frequency response without partial oscillations is guaranteed. With a high magnetic flux in the ferrofluid-filled air-gap, high efficiency and high power handling are possible. Especially suitable for 3-way combinations in conjunction with the fabric dome tweeter G 50 FFL 8 Ohm.
No longer available.
DTW 97 8 OHM
20 mm (0.8") HiFi driver with titanium coating for the highrange above 3000 Hz. Balanced frequency response and good omnidirectional sound distribution. High power handling due to ferrofluid-cooled voice-coil.
No longer available.
DX 16 4 OHM
16 cm (6,5") 2-way coaxial loudspeakers with polypropylene cone and polycarbonate dome tweeter. Integrated crossover (capacitor) for the tweeter. Very balanced sound. Straightforward installation in vehicles with cutouts for 16,5 cm speakers. Door and rear tray installation possible using mounting ring and grille.
Mounting accessories and protective grilles are included.
No longer available.
DX 4x6 P - 4 Ohm
Oval 2-way coax speaker with polypropylene diaphragm and European standard basket. Integrated crossover (capacitor type) for the tweeter. Simple fitting in vehicles with cut-outs for 9 x 15 cm speakers.
Packed in pairs, includes fitting materials.
Typical applications:
- Vehicles
- Mobile homes
Attributes:
- Moisturised cone
- Metal basket
- Coaxial speaker
No longer available.
DX 6X9 4 OHM
3-way triaxial highly efficient oval speaker systems featuring polypropylene woofer and conical midrange. Powerful bass and clean-cut higher frequencies. Particularly suited to installation on the rear shelf. Easy to connect thanks to integrated crossover for midrange and tweeter.
Mounting accessories and protective grilles are included.
No longer available.
F 8 SC 4 OHM
Magnetically shielded 8 cm (3,3") full-range driver with balanced frequency response. Particularly suitable for smaller multimedia applications. Very good value for money.
No longer available.
FD 18 F
Protection cover made of steel sheet for DL18/1 and DL18/2. The enlarged volume betters the sound of inserted speakers. The FD 18 F is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The upper side of the protection cover is equipped with ceramic terminals. Cable clamps ensure the incoming cables of 8, 12 or 16mm diameter are firmly held. A second terminal enables the wiring to be looped through to the next speaker. At the upper side the protection cover is equipped with a thermal fuse and a heat-resistant high-temperature wiring so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems.
Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany.
No longer available.
FD 18 LF
Protection cover made of steel sheet for DL 18/1 and DL 18/2. The enlarged volume betters the sound of inserted speakers compared with FD 18 F. The FD 18 LF is equipped with an integrated fail-safe mechanism which ensures that a burnout in one loudspeaker does not lead to a failure in the entire system of connected speakers. The upper side of the protection cover is equipped with ceramic terminals. Cable clamps ensure the incoming cables of 8, 12 or 16mm diameter are firmly held. A second terminal enables the wiring to be looped through to the next speaker. At the upper side the protection cover is equipped with a thermal fuse and a heat-resistant high-temperature wiring so that it conforms to both Dutch (NEN 2575) and British (BS 5839) regulations for alarm systems.
Unsuitable for fire protection ceilings (F30). Fire protection housing systems (FlamoX) are available from KAISER, 58579 Schalksmühle, Germany. The enlarged volume betters the sound of inserted speakers.
No longer available.
FR 10 P 4 OHM
10 cm (4") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 10 cm speakers.
No longer available.
FR 10 WPX - 4 Ohm (white)
Saltwater resistant 10 cm (4") full-range driver with moulded plastic cone, plastic basket and grille. Absolutely corrosion-resistant and waterproof due to encased magnet and silicon-coated leads. White colour.
Typical applications:
- Loudspeaker for saunas
- Outdoor PA systems
- Loudspeaker for solariums and damp locations
- Boats, ships and open vehicles
Attributes:
- temperature resistant up to 120 °C
- suitable for outdoor applications
- seawater proof
- ball-resistant
*) IP protection class for front side when built into a sealed enclosure
No longer available.
FR 13 8 OHM
13 cm (5") full-range loudspeaker with an inverted cone. Uniform frequency response and powerful low-frequency output. Simple installation e.g. in vehicles with loudspeaker mounts for 13 cm loudspeakers.
Typical applications:
- Built into cars, busses or trains
- Electronic musical instruments
- Monitoring speaker for electronic devices
No longer available.
FR 13 P 4 OHM
13 cm (5") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 13 cm speakers.
Includes fitting materials
No longer available.
FR 16 P 4 OHM
16 cm (5") fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 16,5 cm speakers.
Includes fitting materials
No longer available.
FR 4X6 P 4 OHM
Oval fullrange speaker with tweeter cone and European standard basket. Simple fitting in vehicles with cut-outs for 9 x 15 cm speakers.
No longer available.
FR 8 R 4 OHM
8 cm (3.3") fullrange speaker with good bass reproduction, balanced frequency response and high efficiency. Round basket without mounting ears.
Typical applications:
- Narrow network column speakers
- Control speaker for electronic devices
- Ceiling-mounted speakers in railway carriages and busses
- Electronic musical instruments
No longer available.
FR 9 P 4 OHM
8,7 cm (3,4") fullrange speaker with tweeter cone and standard basket. Simple fitting in vehicles with cut-outs for 8,7 cm-speakers.
Includes fitting materials
No longer available.
G 25 HE 8 OHM
25 mm (1") high-end textile dome unit with compensating magnet to suppress stray magnetic field. Very well-balanced sound properties with "silky-smooth" treble. The perforated pole piece guarantees low resonance frequency, enabling an initial frequency of 1500 Hz. The powerful magnet and the voice coil, filled with low-viscosity ferrofluid, guarantee both high efficiency and good power handling capability.
No longer available.
G 25 ND 8 OHM
25 mm (1") textile dome unit with an oval front plate. This highly efficient neodymium magnet arrangement enables both minimum fitting dimensions and maximum magnetic shielding. Can be used above approx. 2000 Hz. The ferrofluid in the air gap guarantees high power handling capability even at this low separating frequency.
No longer available.
GF 250 2 X 4 OHM
25 cm (10") High-End woofer with black glass fiber cone, solid aluminium die-cast basket and elastic rubber surround. Designed for multi-purpose applications due to 2 x 4 ohms double voice-coil, with excellent properties as 8 ohms drivers in series configuration. The long stroke voice-coil in conjunction with the extended rear pole plate, the vented damper, the vented magnet and the capton voice-coil carrier guarantees long strokes and highest power handling.
No longer available.
GRILLE EFFECT 130
Protective grille made of punched steel sheet, black. Material thickness: 0.5 m.
No longer available.
GRILLE FR 12 BM
Protective grille made of painted metal. Decoration ring made of plastics.
Can be supplied painted in other colours on request.
Colour: silver
No longer available.
HiFi-Bauvorschläge 09/2005
Speaker combinations which were developed in the VISATON lab including comprehensive assembly instructions and parts-lists.
(only available in German)
Content:
- ALTO GENESIS SAT
- ALTO GENESIS SUB
- ALTO I
- ALTO II
- ALTO III C
- ARIA 2 LIGHT
- ARIA LIGHT
- ATLANTIS
- CONCORDE MK II
- COUPLET
- COUPLET LIGHT
- EXPERIENCE V 20
- FONTANA
- FONTANELLA SAT
- FONTANELLA SUB
- MB 115/B
- MB 115/H
- MB 208/H
- NANO SAT MK II
- NANO SUB
- STARLET
- TOPAS
- VIB 2000 GF
- VIB 170 AL
- VOX 200
- VOX 200 LIGHT
HiFi-Bauvorschläge 2005 03/05
Speaker combinations which were developed in the VISATON lab including comprehensive assembly instructions and parts-lists.
(only available in German)
Content:
- ATLAS COMPACT MK V
- CLASSIC 200
- MONITOR 890 MK III
- NoBox BB
- PORTRAIT
- SOLITUDE
- SOLO 100
- SOLO 20
- SOLO 50
- VOX 253
- VOX 253 MTI
- VOX 301
- VOX 80
Home Cinema speaker kits 02/2004
Speaker combinations for home cinema which were developed in the VISATON lab including comprehensive assembly instructions and parts-lists.
(only available in German)
Content:
- CT CENTER 100
- CT MAIN 100
- CT DIPOL 100
- SUB W-20.39
- ARIA
- ARIA 2
- ARIA DIPOL 1
- SUB T-20.39
- COUPLET
- COUPLET CENTER
- CONCORDE MK II
- VOX 253
- VOX 253-CENTER
- SUB T-36.39
KM 140
Ring-shaped magnets for the compensation of the stray magnetic field (magnetic shielding). The ring has to be glued on the rear pole-plate (e. g. with Pattex), reducing the stray magnetic field to a minimun, allowing speakers positionings of 20 cm apart from TV or computer screens.
Suitable for: AL 200 8 OHM; AL 200 DV 2x8 OHM; GF 200 2 X 4 OHM; GF 250 2 X 4 OHM; TIW 360 8 OHM; TIW 360 DS 2 X 4 OHM; TIW 360 X 8 OHM; TIW 400 8 OHM; TIW 400 DS 2 X 4 OHM; W 250 S 4 OHM; W 250 S 8 OHM; W 300 S 4 OHM; W 300 S 8 OHM; WSP 21 S 8 OHM; WSP 26 S 8 OHM
No longer available
KM 80
Ring-shaped magnets for the compensation of the stray magnetic field (magnetic shielding). The ring has to be glued on the rear pole-plate (e. g. with Pattex), reducing the stray magnetic field to a minimun, allowing speakers positionings of 20 cm apart from TV or computer screens.
Suitable for: AL 130 8 OHM; AL 130 A 8 OHM; AL 130 M 8 OHM; AL 170 8 OHM; AL 170 A 8 OHM; DMR 35 8 OHM; DSM 25 FFL 8 OHM; DTW 8.12 NG 8 OHM; DTW 95 NG 8 OHM; G 25 FFL 8 OHM; WS 13 BF 8 OHM
No longer available.
LC 57 H
Loudspeaker level control (L-pad) for treble and midrange, high power handling (up to 20 watts continuous power), with ventilation slots on the rear, left stop position equals "Off". Serves for adapting the mid- and highrange to the acoustic properties of the room. Including mounting screws.
Except of the label, LC 57 H and LC 57 M have the same design.
No longer available.
LC 57 M
Loudspeaker level control (L-pad) for treble and midrange, high power handling (up to 20 watts continuous power), with ventilation slots on the rear, left stop position equals "Off". Serves for adapting the mid- and highrange to the acoustic properties of the room.
Including mounting screws.
Except of the label, LC 57 H and LC 57 M have the same design.
No longer available.
ML 16 100 V
Ceiling speaker with high efficiency and good speech reproduction. Especially for installation in metal ceilings (e.g. ships). A push-terminal block allows a quick and easy connection to the 100-V-network including the eventually necessary level adjustment. After screwing the speaker to the ceiling a quick-mounting bayonet connection provides an easy installation of the grille.
Typical applications:
- Installation in metal ceilings
Attributes:
- Functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h)
- Up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
- Moisturised cone
- UV-resistant
- Metal basket
- 100 V transformer
No longer available.
NG 4"
Protective grilles made of punched steel sheet, black, spray painted. Easy mounting without screws. Material thickness: 0.6 mm.
No longer available.
NG 5"
Protective grilles made of punched steel sheet, black, spray painted. Easy mounting without screws. Material thickness: 0.6 mm.
No longer available.
NG 6,5"
Protective grilles made of punched steel sheet, black, spray painted. Easy mounting without screws. Material thickness: 0.6 mm.
No longer available.
PASSIV-CONE KIT
Passive-cone kit consisting of the basket and rubber surround of the model WS 13 BF. According to the article in the German magazine "Klang & Ton" a passive cone using a cardboard (e. g. beer-mat) can be constructed. The kit also includes a short instruction and a dimensioning table.
No longer available.
PH 8 FRONT
Piezo tweeter for the highrange above 3000 Hz. Very high efficiency with high power handling and balanced frequency response. Front mounting. Suitable for 2- and 3- way combinations without cross-over. Very good value for money.
No longer available.
PH 8 REAR
Piezo tweeter for the highrange above 3000 Hz. Very high efficiency with high power handling and balanced frequency response. Rear mounting. Suitable for 2- and 3- way combinations without cross-over. Very good value for money.
No longer available.
PR 250
Passive radiator consisting of the basket and oscillator from the TIW 250. Fitted with an adjustable mass in place of the voice coil. Fine tuning is by means of adding screw-on sections. An M12 x 40 bolt and an M12 nut are included in the package. The mass can be increased by adding heavier washers or a longer bolt. Instructions on calculating the mass are included.
No longer available.
PROTECTIVE GRILLE 10"
Protective grilles made of punched steel sheet, black, spray painted. Material thickness: 0.6 mm.
No longer available.
SC 4 ND 4 OHM
Magnetically shielded HiFi titanium dome tweeter for the high-frequency range above 2000 Hz. Due to the highly damped sypronyle surround the frequency response is free from partial oscillations. The ferrofluid-filled air-gap provides a high power handling. Magnetic shielding and compact dimensions thanks to the use of a neodynium magnet system. The latter allows real D`Appolito baffle designs.
No longer available.
SC 8 8 OHM
Magnetically shielded 8 cm (3.3") fullrange driver with cellulose cone and rubber surround. Very balanced frequency response. In conjunction with the shielded tweeter SC 5 8 Ohm especially suitable for small magnetically shielded 2-way combinations such as Surround center speakers and multi media systems.
Typical applications:
- Surround centre speakers
- Multimedia systems
- Video monitoring screens
- TVs
- Computer terminals
No longer available.
SL 87 WP 4 OHM
Water proof 8 cm (3.3") full-range loudspeaker with a transparent plastic cone and rubber sealing ring. High mean sound pressure. Optimised for voice and signal output. Magnetically shielded.
Properties:
- Plastic: Mylar (Membrane)
No longer available.
SL 87 WP 8 OHM
Water proof 8 cm (3.3") full-range loudspeaker with a transparent plastic cone and rubber sealing ring. High mean sound pressure. Optimised for voice and signal output. Magnetically shielded.
Properties:
- Plastic: Mylar (Membrane)
No longer available.
TI 100 M 8 OHM
10 cm (4") high-end mid-bass unit featuring a completely new type of diaphragm cone made of pure titanium.
The carefully designed cone combines with the shape and material of the surround and the adhesives to avoid cone resonance. The shape of the basket with its large aperture and rear-ventilated centring piece coupled with the open voice coil with its phase plug produce the lowest possible mechanical losses and produce a correspondingly high mechanical Q-factor. As a result of the construction using double magnets the TI 100 M 8 OHM is also magnetically shielded.
In comparison with the TI 100 8 OHM, this unit has a shorter voice coil and a particularly lightweight fabric surround but generates more sound pressure in the medium range.
The TI 100 M 8 OHM is ideal when used as a mid-range unit e.g. in 3-way high-end speakers.
No longer available.
TIW 250 8 OHM
25 cm (10") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 50 mm voice-coil, capton voice coil carrier and magnet vent.
No longer available.
TIW 360 8 OHM
30 cm (12") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier, vented damper and magnet vent.
No longer available.
TIW 360 DS 2 x 4 OHM
30 cm (12") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier, vented damper and magnet vent. Easy connection due to the double voice coil (2 x 4 ohms) allowing the unit to be connected up for 2 ohm or 8 ohm use.
No longer available.
TIW 360 X 8 OHM
30 cm (12") High-End woofer with a particularly low resonance frequency. Double cellulose cone, large-scale magnet arrangement and a heavy die-cast aluminium basket. Excellent power-handling capabilities with minimum mechanical power loss due to the 60 mm voice coil mounted on a capton coil carrier, the pressure vented pole piece and the rear-vented damper. Particularly suitable for closed cabinets and transmission line applications.
No longer available.
TIW 400 8 OHM
40 cm (15") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier and magnet vent.
No longer available.
TIW 400 DS 2 x 4 OHM
40 cm (15") High-End woofer with black cellulose cone, large magnet and heavy aluminium die-cast basket. Extremely high power handling due to 60 mm voice-coil, capton voice coil carrier and magnet vent. Univesal connection possibilities due to the double voice-coil (2 x 4 ohms) allowing the unit to be conncted up for 2 ohm ore 8 ohm use.
No longer available.
TL 300 MH
120° exponential horn in conjunction with the 1" driver DR 45 N 8 OHM (Art. No. 3053). TL 300 MH is a horn made of beech-wood, manufactured with highest workmanship, suitable for High-End midrange units due to its high quality finish.
No longer available.
UL 12 100 V
2-band compact speaker with very modest dimensions but excellent sound reproduction, natural sound and linear frequency response across the entire response range. Maximum sound pressure is made possible by its robust and highly efficient construction. The drivers used are all magnetically shielded.
Ideally suited to numerous flush-mounted or concealed applications due to the tidy, unobtrusive design.
Typical applications:
- conference facilities
- multimedia
No longer available.
UL 12 8 OHM
2-band compact speaker with very modest dimensions but excellent sound reproduction, natural sound and linear frequency response across the entire response range. Maximum sound pressure is made possible by its robust and highly efficient construction. The drivers used are all magnetically shielded.
Ideally suited to numerous flush-mounted or concealed applications due to the tidy, unobtrusive design.
Typical applications:
- conference facilities
- multimedia
No longer available.
UL 87 4 OHM
Cabinet speaker, equipped with one 8.7 cm full-range loudspeaker. Black plastic housing. Remove the grille and loudspeaker to fit. The housing can then be fitted to a flat surface directly, without a holder. To this end, there are two screw holes in the base.
No longer available.
UL 99 100 V
Cabinet-housed loudspeaker for indoor and outdoor PA applications. Black plastic cabinet, fitted with an oval full-range speaker and transformer for use in 100 V mains supply systems. Rapid electrical connections thanks to spring-loaded terminals. Suitable for both voice and music reproduction. Good voice reproduction properties and high sound pressure.
Typical applications:
- Indoor and outdoor PA applications
- Use in conjunction with a lighting system, e.g. at railway stations, halls etc.
No longer available.
W 100 SC 4 OHM
Magnetically shielded 10 cm (4") HiFi low-midrange driver. Apart from that compatible with W 100 S 4 OHM .
No longer available.
W 100 SC 8 OHM
Magnetically shielded 10 cm (4") HiFi low-midrange driver. Apart from that compatible with W 100 S 8 OHM .
No longer available.
W 130 SC 4 OHM
Magnetically shielded 13 cm (5") HiFi low-midrange driver. Apart from that compatible with W 130 S 4 OHM .
Recommended cabinets:
7 l (closed)
20 l ; 1x BR 6.8 (length 4 cm)
30 l ; 1x BR 19.24 (length 12 cm)
No longer available.
W 130 SC 8 OHM
Magnetically shielded 13 cm (5") HiFi low-midrange driver. Apart from that compatible with W 130 S 8 OHM .
Recommended cabinets:
| Volume/Principle | BR-Channel | fb | fc/QTC |
| 7 l/closed | - | - | 86 Hz/0,75 |
| 20 l/bass reflex | BR 6.8 (length 4 cm) | 44 Hz | - |
| 30 l/bass reflex | BR 19.24 (length 12 cm) | 39 Hz | - |
No longer available.
W 170 4 OHM
17 cm (6.5") HiFi woofer with very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems. Especially suited als replacement driver for many HiFi speakers.
No longer available.
W 170 SC 4 OHM
Magnetically shielded 17 cm (6.5") HiFi woofer. Apart from that compatible with W 170 S 4 OHM .
No longer available.
W 170 SC 8 OHM
Magnetically shielded 17 cm (6.5") HiFi woofer. Apart from that compatible with W 170 S 8 OHM.
No longer available.
W 200 NG 4 OHM
20 cm (8") woofer with air-dried and reinforced cone. Very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems.
No longer available.
W 200 NG 8 OHM
20 cm (8") woofer with air-dried and reinforced cone. Very good price/performance ratio. Suitable for simple 2-way speakers and car rear tray systems.
No longer available.
W 200 SC 4 OHM
Magnetically shielded 20 cm (8") HiFi woofer. Apart from that compatible with W 200 S 4 OHM .
No longer available.
W 200 SC 8 OHM
Magnetically shielded 20 cm (8") HiFi woofer. Apart from that compatible with W 200 S 8 OHM .
No longer available.
W 300 4 OHM
30 cm (12") woofer with air-dried cone and pressure vented pole piece. Can be fitted at front or rear. Excellent value for money coupled with very good power-handling capabilities. Particularly suitable as a replacement for HiFi speakers.
No longer available.
W 300 S - 8 Ohm
30 cm (12") HiFi woofer with powerful drive, extended rear pole plate and long stroke surround. 50 mm voice-coil for high power handling. Very suitable for large 3-way and 4-way combinations and for high power handling subwoofers.
Recommended cabinets:
| Volume/Principle | BR-Channel | fb |
| 70 l/bass reflex | 2 x BR 15.34 | 36 Hz |
| 100 l/bass reflex | 2 x BR 15.34 (length 12 cm) | 32 Hz |
| 1 x BR 25.50 (length 7 cm) | ||
| 150 l/bass reflex | 2 x BR 15.34 (length 7 cm) | 29 Hz |
No longer available.
WB 13 100 V/8 OHM (silver)
2-way compact speakers in a sturdy plastic housing (silver), fitted with one 13 cm woofer and one tweeter providing broad frequency response. Well suited for music and voices. Universally applicable to professional PA or in the home. Can be run as a 100 V system or as 8 ohm units due to an integrated transformer. 100 V transformer and 8 ohm mode are selected using a knob. Swivelling fixing bracket allows the speakers to be mounted horizontally or vertically, as required, and the housing is equipped with a threaded hole for attaching to a bracket or swivelling arm.
Typical applications:
- Conference facilities
- Multimedia
- Outdoor use
Attributes:
- UV-resistant
- 100 V transformer
- Weather-proof plastic cabinet
- Plastic: ABS (UL 94: HB)
No longer available.
WL 13 PR P - 100 V
Wall-mounted speaker with a volume control-knob and priority relay, white plastic cabinet and metal grille. Fitted with a full range driver. Good music reproduction and clear speech reproduction properties. Connection to 100 volt network and level trimming by means of spring terminal.
Also available:
- WL 13 P - 100 V (without volume cotrol)
- WL 13 PR - 100 V (with volume control, without priority relais)
No longer available.
WS 13 BF 8 OHM
13 cm (5") HiFi low-midrange driver with 25 mm voice-coil, elastic rubber surround and coated paper cone. Due to balanced frequency response and high efficiency suitable as woofer and low-midrange driver.
No longer available.
WS 25 E 4 OHM
25 cm (10") woofer with coated paper cone, rubber edge and extended rear pole plate for long strokes. Due to the basket design especially suited as replacement woofer for many standard HiFi speakers.
No longer available.
_More speakers_
For data of older speakers (starting from 1984) please see: "Download T/S parameters" (172 KB)
