|
Building instructions
The TL-SUB 30 was designed to be positioned in a corner and, for this reason, has a pentagonal base. The 19 mm sides, front and rear pieces, the dividers and the trapezoidal boards have to be chamfered and the baffle openings cut into the front piece. First of all, the two rear panels are connected to the base and then the two rear dividers and the first trapezoidal board. We recommend laying the subwoofer on its rear edge with appropriate supports. Before mounting the front divider, fix the reinforcing boards to it. Then attach the second trapezoidal board and the side panels and finally the front piece. The opening for the terminal connections can be made at any suitable place.
The pentagonal design of the cabinet is not absolutely essential. The cabinet can also be rectangular as long as the aperture areas and lengths of the channels are left unchanged.
Please note the additional instruction sheet: Additional instruction (pdf; 101 kB)
Inner damping
Thanks to the intelligent double transmission line arrangement, damping is not required.
| Component parts list for 1 box |
| |
|
Cabinets and ready-made speaker can be ordered from www.vc-mailorderservice.de .
|
| |
| Woofer |
TIW 300 8 Ohm
|
2 pcs. |
| Terminal |
BT 95/75 (mounted at any place)
|
1 pc. |
| Wood screws |
5 x 30 mm
|
16 pcs. |
| Countersunk screws |
3,5 x 25 mm
|
4pcs. |
| Cable |
2 x 2,5 mm˛
|
(length according to position of terminal) |
| Cabinet parts list for 1 box |
| |
| Parts |
Size (mm) |
Quantity |
| |
| Material: 19 mm MDF or chipboard |
| Bottom panel |
523,5 x 523,5 |
1 |
| Trapezium panels |
768 x 217 |
2 |
| Front panel |
476 x 2150 |
1 |
| Side panels |
225 x 2150 |
2 |
| Rear panels |
561,5 x 2150 |
2 |
| Partition |
460 x 1732 |
1 |
| Partition |
740 x 1630 |
1 |
| Top panel |
740 x 150 |
1 |
| Braces |
160 x 130,5 |
4 |
| |
|
Note: All dimensions are external dimensions, bevels and angled cuts are to be cut away.
|
|
