CASABLANCA III

Construction

Although the design of this cabinet may appear at first sight to be complex, it is, in fact, made up of simple, rectangular panels and only the radii and openings need more careful attention. The crossover is mounted on the rear wall behind the bass vent.

Inner damping

When damping this cabinet, remember that the opening between the larger and smaller chambers of the cabinet (diameter 100 mm) must remain free. One bag of damping material is inserted into the upper cabinet. The lower cabinet chamber remains free.

Component parts list for 1 box

Tweeter:	G 25 FFL 8 Ohm	1 piece
Midrange driver:	G 50 FFL 8 Ohm	1 piece
Woofer:	GF 200 2 x 4 Ohm	1 piece
Crossover:	see diagram
Bass reflex tube:	BR 15.34 (length: 14,7 cm)	2 pieces
Terminal:	ST 77	1 piece
Damping material:		1 bags
Wood screws:	4 x 20 mm	6 pieces
Countersunk screws:	3,5 x 25 mm	12 pieces
Cable:	2 x 1,5 mm²	4,7 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Lower top and bottom panel	381 x 350	2
Lower front panel	550 x 350	1
Lower rear panel	512 x 312	1
Lower side panel	512 x 381	2
Front panel for GF 200	700 x 230	1
Inserted Panel	235 x 230	1
Front panel for G 50 FFL	413 x 230	1
Front panel for G 25 FFL	555 x 230	1
Upper front panel	574 x 230	1
Top panel	181 x 230	1
Upper side panel	181 x 555	2
Upper rear panel	192 x 555	1
Base	50 x 312	2
Base	50 x 324	2

Crossover

Sketch

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|