BIJOU

Art. No. 5917

Construction

All the cabinet panels are cut from 16 mm chipboard or medium density fibreboard, butt-jointed and glued. After that, the openings for the driver and terminals are cut out and any necessary recesses cut. The chamfer on the outer baffle can be made either before the cabinet is glued together or afterwards.

Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. The PCB can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable.

Inner damping

The damping material is loosely pushed into the cabinet. The space immediately behind/above the bass tunnel must remain free.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter	KE 25 SC 8 Ohm	1 pc.
Woofer	AL 130 8 Ohm	1 pc.
Crossover	Crossover BIJOU	1 pc.
Terminal	ST 77	1 pc.
Damping material	Polyester wool	1 bag
Wood screws	3.5 x 19 mm	8 pcs.
Countersunk screws	3.5 x 25 mm	4 pcs.
Cable	2 x 1.5 mm²	1.1 m

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity
Material: 16 mm chipboard or MDF
Front	330 x 200	1
Side panels	330 x 214	2
Top	214 x 168	1
Rear panel	314 x 168	1
Bottom panel	198 x 168	1
BR tunnel top	132 x 178	1
BR tunnel side	20 x 178	2

sketch

crossover

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|