SOLITUDE

Art. No. 5988

Construction

The cabinet sections, cut from 19 mm chipboard or medium density fibreboard (MDF) board are butt jointed and glued. The chamfers on the baffle can be made with a jigsaw or circular saw set to 45° or added later using an orbital sander. After that, the openings for the driver and terminals are cut out.

The crossover can be attached to the rear wall behind the baffle cut-out for the upper woofer.

Inner damping

Distribute all the damping material (7 mats) uniformly inside the chamber for the wide-range speaker. The entire woofer chamber does not require damping.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Fullrange speaker	B 200 6 Ohm	1 pc.
Woofer	GF 200 2 x 4 Ohm	2 pcs.
Crossover	Crossover SOLITUDE	1 pc.
Terminal	High-End-Terminal	1 pc.
Damping material	Lamb's wool	3.5 bags
Wood screws	4 x 25 mm	18 pcs.
Cable	2 x 2.5 mm²	5.5 m

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity
Material: 19 mm MDF or chipboard
Front panel	1300 x 270	1
Side panels	1300 x 431	2
Top/buttom panels	232 x 431	2
Rear panel	232 x 1182	1
Inner top panel	232 x 230	1
Inner rear panel	232 x 418	1
Lower inner buttom panel	232 x 150	1
Lower inner front panel	232 x 131	1
Upper inner buttom panel	232 x 99	1
Brace	232 x 200	1
BR-channel	232 x 250	1
Braces	163 x 80	2
Brace	412 x 80	1

Crossover

sketch

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|