VIB MIKRO AL

Construction

The cut-out for the tweeter is made using the templates supplied with the speakers. The cabinet of the speaker has a chamfer to reduce edge reflection. This effect can be enhanced still more by flush mounting the two loudspeaker drivers in the baffle. This plus the compact dimensions of the front give the VIB MIKRO AL its excellent distribution characteristics. The crossover unit is mounted on the base of the cabinet.

Inner damping

The damping uses one mat of damping material rolled up and placed vertically into the cabinet.

Component parts list for 1 box

Tweeter:	G 25 FFL 8 Ohm	1 piece
Bass-midrange driver:	AL 130 8 Ohm	1 piece
Passive-cone kit:	(in pairs)	1 piece
Accessories:	Card board	1 piece
	LTS 50
	Glue
Terminal:	ST 77	1 piece
Crossover:	"VIB mikro AL"
Damping material:		1/2 bag
Wood screws:	3,5 x 19 mm	8 piece
Countersunk screws:	3,5 x 25 mm	8 piece
Cable:	2 x 1,5 mm²	1,5 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	300 x 200	2
Side panel	300 x 212	2
Top and bottom panel	212 x 162	2

Crossover

Sketch

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|