CT MAIN 200

Construction

The cabinet consists of 19 mm boards and a 16 mm double baffle. The side piece, top and base of the medium range chamber are, at the same time, cabinet stiffeners. First of all, make the necessary cut-outs in the cabinet panels and the chamfers on the double baffle. Once the cabinet has been made up, prepare the mounts for the woofer and the mid-range drivers. Finally, fit the speaker drivers. If required, a stand can be made using the same size as the cabinet base to the required height.

Inner damping

The damping of the speaker uses half a mat of damping material pushed into the medium range cabinet. The remainder is pushed into the bass chamber.

Component parts list for 1 box

Tweeter:	SC 4 ND 4 Ohm	1 piece
Midrange driver:	W 130 SC 4 Ohm	2 pieces
Woofer:	W 200 SC 4 Ohm	2 pieces
Crossover:	Crossover CT Main/Center 200
Terminal:	ST 77	1 piece
Damping material:		2 bags
Countersunk screws:	3,5 x 25 mm	24 pieces
Cable:	2 x 2,5 mm²	2,5 m
	2 x 1,5 mm²	1 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	280 x 880	2
Side panel	202 x 880	2
Top and bottom panel	202 x 242	2
Midrange rear panel	150 x 352	1
Midrange side panel	202 x 352	1
Midrange top and bottom panel	242 x 101	2

Material: 16 mm MDF-Platte oder Holz
Double baffle	280 x 880	1

Crossover

Enclosure

Baffle

Mounting SC 4 ND

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|