CT CENTER 200

Construction

The cabinet consists of 19 mm boards and a 16 mm thick double baffle. The side panels of the medium range chamber are, at the same time, cabinet stiffeners. It is for this reason that the boards are "T" shaped. First of all, make the necessary cut-outs in the cabinet panels and especially the chamfers on the double baffle. Once the speaker has been completed, cut out the spaces for the woofer and the mid-range drivers. Finally, fit the speakers into the cabinet.

Inner damping

The damping of the speaker uses half a mat of damping material pushed into the medium range cabinet. The remainder is pushed into the bass chamber.

Component parts list for 1 box

Tweeter:	SC 4 ND 4 Ohm	1 piece
Midrange driver:	W 130 SC 4 Ohm	2 pieces
Woofer:	W 200 SC 4 Ohm	2 pieces
Crossover:	Crossover CT Main/Center 200
Terminal:	ST 77	1 piece
Damping material:		2 bags
Countersunk screws:	3,5 x 25 mm	24 pieces
Cable:	2 x 2,5 mm²	2,5 m
	2 x 1,5 mm²	1 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	400 x 630	2
Side panel	192 x 362	2
Top and bottom panel	192 x 630	2
Midrange rear panel	120 x 362	1
Midrange side panel	192 x 362	2

Material: 16 mm MDF or wood
Double baffle	400 x 630	1

Crossover

Enclosure

Baffle

Mounting SC 4 ND

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|