SKYLINE

Art. No. -

Construction

In the rear panel there are two openings. The upper one is the bass port, the lower for the terminals.
If you intend to permanently glue the rear panel, the crossover unit has to be fixed to the base of the cabinet, since it will not fit through the opening in the baffle of the WS 13 BF.
The crossover unit can easily be attached to this board, if a wooden board is attached vertically to the floor of the cabinet (refer to drawing). Ensure, however, that this arrangement does not interfere with the fitting of the bass tube.

Component parts list for 1 box

Tweeter:	DSM 25 FFL 8 Ohm	1 piece
Midrange driver:	WS 13 BF 8 Ohm	1 piece
Woofer:	WS 13 BF 8 Ohm	2 pieces
Crossover:		"Skyline"
Bass reflex tube:	BR 15.34 (length 14,7 cm)	1 piece
Terminal:	ST 77	1 piece
Damping material:		2,5 bags
Wood screws:	3,5 x 19 mm	16 pieces
	3,5 x 25 mm	4 pieces
Cable:	2 x 1,5 mm²	4 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	962 x 152	2
Side panel	1000 x 270	2
Top and bottom panel	270 x 152	2
Midrange rear panel	265 x 152	1
Midrange bottom panel	100 x 152	1
Brace	232 x 50	2
Brace	152 x 100	2
Base	240 x 160	1
Crossover base	190 x 170	1

Crossover

Sketch

Inner damping

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|