CLASSIC 200 GF



 

Exploded drawing

Assembly

All the cabinet panels are cut from 19 mm chipboard or medium density fibreboard, butt-jointed and glued. After that, the openings for the driver and terminals are cut out and any necessary recesses cut. The chamfer on the outer baffle can be made either before the cabinet is glued together or afterwards.

The crossover has to be mounted on the inner side of the rear panel across from the woofer.

Inner damping

The damping material is loosely pushed into the cabinet. The space immediately behind the bass reflex tube must remain free.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter G 20 SC - 8 Ohm

1 pc.

Mid-range TI 100 - 8 Ohm

1 pc.

Woofer GF 200 - 2 x 4 Ohm

1 pc.

Crossover Classic 200 GF

1 pc.

Bass reflex tube BR 25.50 (full length)

1 pc.

Terminal ST 77

1 pc.

Damping material Polyester wool

2 bags

Wood screws 4 x 20 mm

6 pcs.

Wood screws 3.5 x 19 mm

8 pcs.

Countersunk screws 3.5 x 25 mm

8 pcs.

Cable 2 x 2.5 mm²

1.5 m

Cable 2 x 1.5 mm²

1.5 m

Cabinet parts list for 1 box

Parts

Size (mm)

Quantity

Material: 19 mm chipboard or MDF
Front, rear panel

260 x 1000

2

Side panels

222 x 1000

2

Top, bottom panel

222 x 222

2

MR rear panel

222 x 290

1

MR bottom

222 x 65

1

Reinforcer

222 x 80

2

Bassreflex modification

Sketch

Crossover