VIB 2000 GF



 

Exploded drawing

Assembly

The circular cut-out (73 mm ø) in the baffle is for the BR 15.34 tube. The 78 mm cut-out in the rear panel is for mounting the ST 77 terminals. The crossover unit is mounted on the panel behind the bass cut-out.

Inner damping

The damping is a simple matter: as shown in the diagram, the four free square openings of the stiffening construction take one mat each, so that the upper part of the speaker cabinet is loosely filled. The lower part is left completely empty.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter

G 25 FFL - 8 Ohm

1 pc.
Low-midrange driver

GF 200 - 2 x 4 Ohm

1 pc.
Crossover

Crossover VIB 2000 GF

1 pc.
Bass reflex tube

BR 15.34 (full length)

1 pc.
Terminal

ST 77

1 pc.
Damping material

Polyester wool

2 bags
Countersunk screws

3.5 x 25 mm

8 pcs.
Wood screws

4 x 20 mm

6 pcs.
Cable

2 x 1.5 mm²

2 m

Cabinet parts list for 1 box

Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Front / rear panel 210 x 862 2
Side panels 900 x 296 2
Top / bottom panel 210 x 296 2
Brace 210 x 100 2
Brace 258 x 100 2
Base panel 258 x 210 1

Inner Damping

Sketch

Crossover