Exploded drawing


Once the front panel has been shaped with all the necessary bevels, openings and milled shapes, and the terminal port has been completed at the rear, the base, lid, sides and rear wall are glued together.

The front panel is positioned from the front.

Inner damping

One mat is used to cover the entire rear wall, the second is folded down the middle and positioned behind the tweeter with the fold pointing towards the lid. This means there are three layers of damping material behind the tweeter and one behind the B 200 - 6 Ohm.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter KE 25 SC - 8 Ohm 1 pc.
Waveguide WG 220x150 1 pc.
Bass Midrange B 200 - 6 Ohm 1 pc.
Crossover LA BELLE CR 1 pc.
Terminal BT 95/75 1 pc.
Dampingmaterial Polyesterwool 1 bag
Cylinder head screws 5 x 30 mm 6 pcs.
Round head screws 4 x 20 mm 4 pcs.
Countersunk screws 3.5 x 25 mm 10 pcs.
Cable 2 x 2.5 mm² 1.5 m

Cabinet parts list for 1 box

Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Front panel 260 x 478 1
Side panels 185 x 440 2
Top / bottom panel 185 x 260 2
Rear panel 440 x 222 1