ARIA

Art. No. 5945

Construction

The cabinet body uses 16 mm boards. First of all, cut the holes in the boards and apply the bevels. This can be done using an electric jigsaw or hand-held circular saw set to the required angle. Once the cabinet has been completed, apply the milling work for the loudspeaker. Finally, fit the cones.

Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. It can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable.

Inner damping

The damping material is loosely arranged in the cabinet.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter	G 20 SC 8 Ohm	1 pc.
Woofer	TI 100 8 Ohm	1 pc.
Crossover	Crossover ARIA	1 pc.
Bass reflex tube	BR 6.8 (full length)	1 pc.
Terminal	ST 77	1 pc.
Damping material	Polyester wool	0.25 bag
Wood screws	3.5 x 19 mm	4 pcs.
Countersunk screws	3.5 x 25 mm	8 pcs.
Cable	2 x 1.5 mm²	0.75 m

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity
Material: 16 mm chipboard or MDF
Front and rear panel	270 x 160	2
Side panel	270 x 128	2
Top and bottom panel	128 x 128	2

Sketch

Crossover

Characteristics and Sound

Search		Home \| Single Drivers / Accessories \| Kits \| Car-Hifi \| High End \| Industry \| Public Address \|